$153.48 – $805.08
SD003RTD. This RTD can be customised. View more to select the many options for this PT100.
Use the selection to customise your probe.
Contact Teltherm for technical assistance or if you require options that are not shown.
The standard design is a PT100 sensor c/w 150 mm long stem and a small head.
If a transmitter is required a large head must be selected.
Select the 4 wire option for best accuracy.
The aluminium head is IP67 and provides ease of installation. Wire from the process controller are attached to terminals in the RTD head allowing probes to be replaced easily in the field.
RTD probes are generally more accurate than thermocouples and best used for temperature ranges of -40 °C to 600 °C. For temperatures above 500 °C consider choosing a thermocouple.
Our standard RTD sensors are Class A. Should you require better accuracy contact Teltherm to order 1/10 Din.
Teltherm supply hand held thermometers, controllers and indicators in order to provide the readouts for your customised probes.
Teltherm manufacture a large range of temperature probes including thermocouples and platinum resistance thermometers (RTDs, PT100s, PT1000s).
For added confidence and traceability select an IANZ certificate.
SD039. Bar Stock Thermowell with parallel probe stem.
390 mm x 8 mm pointed tip insertion probe for bitumen testing. Type K thermocouple. Can be customised to suit application. View more for further options.
SD035. Bar Stock Thermowell with lagging extension for extra length required when the process has insulation or lagging.
World class yet surprisingly affordable Standard Platinum Resistance Thermometer (SPRT). Extremely low drift rate – Used by Primary Laboratories the world over. Inconel sheath, 6.35 mm x 500 mm Probe Temperature range: -200 °C to 670 °C Alpha 0.003925, Rtp/R0 100