This differential pressure-based Cone Meter by NuFlo is a process control and multi-fluid meter that is ideal for upstream, midstream and downstream applications that present a wide range of measurement challenges. Works in unprocessed and processed applications due to the hydrodynamic shape of the cone. View more for ranges and applications.
Contact Teltherm for technical assistance and quotes.
NuFlo Cone Meter has wide rangeability and operates over large turndowns which allows differential pressures to be measured down to < 1 inch water column. It generates a low noise differential pressure signal at the centre and back of the cone.
High Performance Characteristics:
Accuracies up to ± 0.5% of reading (Reynolds Number and fluid dependent) with a nominal repeatability of 0.1% under many conditions and modes of operation.
The meter can operate with turndowns nominally up to 10-1.
These specifications meet custody transfer performance requirements for natural gas transmission measurements with sizes to > 36 inches. Contact Teltherm for exact rangeability per process fluid.
Manufactured to order in diameters from 1 in. to 48 in with flanges ranging from Class 150 to 1500 in accordance with ASME B31.3. Available in special materials such as duplex stainless steel and hastelloy.
Oil and Gas: Upstream & Midstream Applications Include:
Natural Gas Custody Transfer Measurement (CTM), Wellhead and Separator Measurement (both produced water and gas) Compressor Control and Fuel Gas, Wet Gas and Steam,Natural Gas Allocation Metering, White Oil Blending, Seawater Pump Control, Crude Oil Pump Control, Allocation and Injection Metering (all forms), Enhanced Oil and Gas Recovery (CO2 and Steam), Coal Bed Methane (CBM) for low pressure systems (circa 5-20 psig), Pure Product Metering opportunities in refining applications.
Oil and Gas: Downstream applications include:
Gas Processing, Butane, O2, CO2, Liquid Natural Gas (LNG), Waste-Water, Municipal Water, Pharmaceutical.
Besta level switches are used in the Oil and Gas, Shipbuilding, Power Generation, Chemical and Petrochemical industries
Select the SC-250 for rigorous conditions when increased precision is required. Accuracy according to VDE/VDI 3513. +2.5 % of FSD (+1.5% of Medium value) and +1.6 % of FSD (+1% of Medium value) available on request. Flow rate: Water: 2.5 l/h up to 180 m3/h. Air: 0.07 Nm3/h up to 5,400 Nm3/h Linear scales, calibrated in l/h, m3/h, kg/h, Tm/h, %, etc Sizes DN-15 to DN-150
Gladiator Acoustic Switch Non-contact self-cleaning blocked chute detection switch. The Gladiator Acoustic Switch uses Acoustic Wave technology in a new Sender/Receiver form for blocked chute detection and anti-collision for heavy machinery.
The Maric Flow Control Valve has been developed to provide a constant pre-set flow rate irrespective of pressure or pressure fluctuations.