The KANE255 combustion flue gas analyser with direct CO2 measurement is ideal for engineers who install/service oil or gas boilers. Measures CO2,CO & temperature Calculates O2, CO/CO2 ratio, efficiency. Infrared output to optional printer – versatile and affordable
Compact combustion analyser with rotary switch and printer output facility.
Long life sensors measure CO2 direct plus CO (0-2,000 ppm) and temperature.
Calculates O2, CO/CO2 ratio and efficiency.
Fitted with protective rubber sleeve with integral magnet.
Supplied with KMCP2 flue probe, 4 x NiMh batteries, charger, test report and manual.
Features include data hold, internal memory and 6 year warranty if serviced annually.
Same as KANE255 above plus KANE IRP-2 infrared printer and carry case.
KANE255 OIL KIT
Same as KANE255 KIT plus KANE MSP manual smoke pump, 0-300 psi pressure gauge, pressure gauge manifold, compound gauge (pressure and vacuum) , high pressure hose and 2 x adaptors in a large carry case.
Check out the attached pdf or contact Teltherm for assistance.
The Murco Gas Sensor (MGS) is a state-of-the-art fixed gas detector. The sensors can be used on a stand-alone basis or integrated into Controls or Building Management Systems (BMS) using its digital or analogue output. 7 Optional housings Typical Applications include detection of refrigerant, combustible, toxic and volatile gases.
Senscient's Enhanced Laser Diode Spectroscopy (ELDS) uses the proven benefits of laser based gas sensing and take this sensing principle to the next level. They provide the highest level of gas specificity, false alarm rejection and safety integrity in the most challenging operating conditions. Detectable gases include: Methane (CH4) , Ethylene (C2H4), Ammonia (NH3), Carbon Dioxide (CO2), Hydrogen Sulphide (H2S), Hydrogen Chloride (HCl) and Hydrogen Fluoride (HF). Other gases are available contact us.
The MicroRAE four-gas portable detector brings enhanced userfriendliness and flexibility to wireless gas detection. This enables continuous, instant visibility of safety threats for faster, more informed decisions, to protect workers, facilities, and the environment, and to optimize operations Man Down Alarm with real-time remote wireless notification 1 GPS module for location Bluetooth low energy connection to a Smart Phone device for uplink data communication and device configuration. Remote notification & Panic function Fully automated bump testing and calibration with AutoRAE 2
This portable single-gas monitor is designed to keep workers safe against the threat of carbon monoxide (CO) or hydrogen sulphide (H2S). For other gases see the ToxiRAE II. High-performance, three-electrode sensor delivers fastest response time. Use with the AutoRAE Lite bump test and calibration station to provide low total cost of ownership. Comes c/w IANZ Calibration Certificate. Protects workers and delivers worksite CO or H2S personal detection compliance.