Mercer Valve 9100 Series Threaded Safety Relief Valves are high flow rate, pressure relieving devices. The field-proven soft seat and disk type design has an expected seat life of hundreds of "pops". Full length guiding of "low rate" set pressure springs insures accurate, repeatable relief action. Consult the attached pdf for capacity, ranges, orifices and sizing.
The valve is suited for all industrial air, gas, or liquid relief applications, including compressors, separators, heater treaters, scrubbers, dehydrator, free water knockouts, thermal relief, gas production units, transmission and gathering lines, meter runs, gas plants, chemical plants and other industrial applications.
The soft seat 9100 Series has a field-proven lip seal design, which allows for a tighter seal up to set pressure. This tight seal reduces leaks and limits product loss.
All 9100 Series Threaded Valves are built in accordance with the requirements of the ASME Boiler and Pressure Vessel Code.
Contact Teltherm for technical assistance and quotes.
Neo-Dyn's 123P compact, SS, field adjustable pressure switch for low to mid-range process applications. Adjustable set point ranges from 3 – 2300 psig (increasing). Hermetically sealed, explosion proof electrical. The flush mount (welded diaphragm) process connection makes this switch ideal for viscous process applications.
Designed for high pressure pneumatic or low impulse hydraulic applications requiring a narrow dead band. Models have factory fixed set points. Weatherproof (NEMA 4 & 13).
Compact, adjustable pressure switch for high pressure hydraulic process applications. SS wetted materials and hermetically sealed, explosion-proof electricals suitable for hazardous and corrosive media or environments. Explosion Proof Hermetically Sealed (NEMA 4X, 7, 9 and 13).
To order view more for selection options and prices. Pressure gauge pigtail siphons are used to protect the pressure gauge from the effect of hot pressure media such as steam and systems that contain superheated vapour. U Type Siphons are suitable for vertical pipe mounting. Coil / Pigtail Siphons are suitable for horizontal pipe mounting. A gauge cock is generally connected between the pressure gauge and siphon for isolation. Contact Teltherm for further options and technical assistance.