Honeywell's Limitless product line combines the best of Honeywell's global limit switches with the latest commercial state-of-the-art wireless technology. Wireless-enabled limit switches can be used for position sensing and presence/ absence detection for an endless number of applications. The Limitless Series is especially beneficial for remote monitoring applications where wiring or wire maintenance is not physically possible or economically feasible. Combining this greater flexibility with proven harsh-duty packaging can result in increased efficiencies for machines, equipment, OEMs, and operator
The Limitless Series of switches is based on 802.15.4 point-to-point communications and can be configured to allow potentially up to sixteen devices to communicate with one receiver module. The products are based on Honeywell's proven harsh-duty and medium-duty limit switches. They have the same mechanical life, temperature ratings, and sealing as standard switches, but they're wireless. Wireless functionality is implemented through an 802.15.4 open protocol RF board operating in the 2.4 GHz globally license-free frequency band. The wireless signal is received by either a panel-mount receiver, or an industrial DIN-rail module, that converts it to an output. Outputs can be LEDs, buzzers, or electrical signals. The capability also exists to provide CAN, ProfiBus, and standard Ethernet communications
The 14CE/914CE Series offers a miniature, rugged, compact, pre-wired switch which has proved itself successful and gained wide market acceptance. The entire range of 14CE and 914CE switches has been approved to meet the requirements of the Low Voltage directive and is therefore CE marked. CE switches have different degrees of protection from IP66 to IP68 for the fully booted head styles. The cable entry is fully potted using a special compound to ensure that ingress is virtually impossible.
State of the art wireless compact personal gas detector. Choose from CO, O2,%LEL and H2S, HCN, SO2. Man down alarm and wireless realtime monitoring 24/7. Pumped or diffusion models available
The BZE/DTE Series general purpose enclosed limit switches offer precision operation and sturdy actuation in a compact but rugged aluminium housing. The large wiring enclosure means that the user can get access to wire the device simply. The switch incorporates high repeatability of the switch point early in the travel of the switch. This is achieved through a very tolerant over-travel mechanism which ensures that application drift will not affect long term accuracy of the switch.
LS Series compact limit switches are carefully designed for accurate repeatability under the most stringent conditions. Compact size and field adjustable features greatly extend the flexibility of these switches. Heads may be positioned at 90° increments. Side rotary models can be adjusted for clockwise and/or counter-clockwise operation. Actuators can be set and locked in any position through 360°. The rugged housings and actuator heads are constructed from cast aluminium, capable of withstanding physical abuse. Protection against oil, water and dust is achieved by O-ring seals on the actuator shaft; a ring seal between head and body; and a seated compression seal between cover and case. The LS fits in many places too small for any other fully adjustable limit switch